Cannabis concentrates like live resin, rosin, shatter, wax, oil, or crumble are extracted from the sticky trichomes (crystals) found on the cannabis plant. But cannabis is far more than just THC and CBD. There is a variety of terpenes (flavor and scent molecules), that’s where dabbing temperature matters. Aside from the rosin technique, the extraction process requires the use of solvents like butane, propane or carbon dioxide to produce potent oils with high levels of THC. Depending on the method chosen, each strain and growing technique, Terpene levels will vary and can even be added! Studies suggest that these so called tepenes contribute to the major differences in strain effects on the mind and body. Dabbing Temps at low levels will produce a healthier vapor that has far more flavor than a dabbing temps that are high
These concentrates can be vaporized, dabbed or free burned in a hot plate for the whole room. Depending whether you are using a torch to heat or using electronics your experience will vary greatly. First and foremost, all high quality terpene rich medicine should always be consumed on clean utensils and an enail. No torch being timed is even close to the same everytime. Room temp, fans running that day, long torch time, unreeving heating, or my personal one that pisses me off… pooling! The list goes on and on of why torches such. Our enail will keep the temp stable all day all night, its ready when you want to use it. Never guess temps, know the exact temp to the degree! You spend hard earned money on quality product, why skimp on the correct tools for the job? Get an enail today and change the way you do dabbing for life!
How Does Dabbing Work?
Dabbing requires heating a nail, and touching — or dabbing — the concentrate onto it, rather than placing it directly under a flame as one would with dry herbs. When concentrates make contact with the hot surface, they burn into a potent smoke.
While using a nail that’s not hot enough will waste concentrates by causing them to puddle and pool on its surface, a nail that’s too hot will cause the concentrates to burn too quickly, resulting in wastage and less flavorsome hits. Although some smoke may pass through the pipe after a concentrate combusts, the dab is essentially wasted. As well as destroying its flavor, overheating a concentrate will degenerate THCA into CBN. Not to mention inhaling hot air won’t feel good on the throat or lungs.
THCA, or Δ9-tetrahydrocannabinolic acid, is a natural part of the cannabis plant that, upon the application of heat, changes into THC, the component responsible for getting you high. This process occurs when the concentrate is dabbed. It’s important to know, however, that if the nail is too hot when dabbing, the concentrate’s THCA can degrade into cannabinol (CBN) and wind up as reclaim. Although CBN has some psychoactive properties, it’s only 10% the strength of THC. Researchers believe CBN causes grogginess as well as dizziness and disorientation in users.
Our eNails provide fast heating and steady temps eNails
Using an electronic nail takes all the guesswork out of dabbing. Simply plug the eNail into the wall, choose the desired dabbing temperature and wait until it’s ready. Once it reaches the predetermined level, the eNail’s dabbing temperature will remain constant until it is unplugged or switched off, creating a more relaxed dabbing experience for whoever in the room wants to dab without the tedious time consuming use of a torch.
Benefits of Low-Temperature Dabs
With an eNail, users can experiment with a range of temperatures to see what works best with different concentrates, while discovering their own personal preferences. Low temp dabs optimally occur between 600 and 710°F, and you can find the best eNail temp for you with a bit of trial and error. Dabbing with a lower temperature than that can result in the nail not being hot enough to heat the concentrate, causing it to go to waste by pooling up on the nail, bubbling and dissipating. Dabbing at low-temperatures is beneficial for a variety of reasons. Aside from enhancing the flavor of the concentrate by not burning away the terpenes, low-temperature dabbing preserves every part of the oil — including the THC, meaning each hit will be powerful and savory. Use a carb cap when experimenting with low-temperature dabs to produce twice as much vapor and get the most out of every hit. The medium temperature for dabbing is around 700°F. High Temp dabbing is anything above 720 after that you are no longer vaping! You are now smoking (combustion = cancer) science has proven this. Vaping has not been proven to be safe or unsafe. It is not combustion, and merely a steamed version of your oil. Just like when you take a light to a white wall, the carbon will leave black soot on the wall, if you shower and steam up your walls, it dries with NO residue.
Low Temp Dabs…Don’t Let Your Nail Get Too Hot
Unfortunately, the most common mistake made by dabbers is to overheat the nail by waiting for it to glow red before hitting it. According to High Times, a blood-red glow indicates a dab temperature of 1075°F, while a faint-red glow indicates 930°F. High-temperature dabbing occurs at any temperature higher than 900°F and is just as wasteful as dabbing at too low a temperature. Aside from ruining the taste of the concentrate, which starts happening when nails are heated above 720°F, excessive heat will waste concentrates by causing it to splatter all over the place. Taking a hit off a red-hot nail can also damage the throat and lungs.
Finding the perfect dabbing temperature depends on the type of nail and concentrate being used. Use a carb cap to enhance the flavor, maximize each hit and save money by conserving concentrate. In the end we tend to like 655-695°F and think it is best. But it is still up to you, and choosing our enail will help your find and maintain your perfect dabbing temperature.
Life without an enail
Without an eNail, it can be impossible to accurately determine and regulate the dabbing temperature of a dab. Timers may help but ambient room temp is always different at different times resulting in d0ifferent temps for the same timer set. Imagine all the time wasted waiting for a timer, consuming your night and your party. if you have several people at a party, BBQ, or Dab bar this can be hectic and frusteratign. One option is to buy a temperature gun to determine the temperature of a nail, but who wants another part of the process? And their accuracy is questionable, if you use the same heat gun, heat both nails for 25 seconds in 2 different external environments’ one 62 °F and the other at 92 °F the variables of the air temp are not the same and the readings cannot be trusted as accurate. Lab measurements use conductively by touching the surface with a probe just like our enail which is physical connected to the control unit measuring it with ± 1-2 °F accuracy.
Also as soon as the wax hits the nail it begins to pool up if you don’t have an enail . Re-Torching it to use up the pooled wax is tastes nasty. Our enail sense quickly and the moment it dips it gradually picks up keeping precision accuracy and never effecting the terpenes.
0-300°F: Too low Extreme low Temp Dab – 90-99% wastefull
This will result in minimal vaporization of available cannabinoids and terpenes – you will not be consuming anywhere near all the concentrate dropped on the nail. Expect the concentrate to leave a large puddle of oil that produces little vapor (waste it to taste it).
450-550°F: Very Low temp dab 60-90% wasteful
This is a sweetter spot for vaporization of all cannabinoids and terpenes while retaining maximum flavor. Dabbing at this temperature will produce a smooth hit that is relatively easy on the lungs. The effects will be pleasant but milder than at hotter temperatures.
550-650°F: Low temp dab very little waste, lots of fats and lipids will turn black and crusty
This is a nice middle gdround for those seeking both stronger flavor and effect. At this temperature, a mix of vaporization of Both THC CBD CBN TERPENES and many others. Also noted at this temp Plant Wax, Fats and Lipids will not vaporize on our enail if set
675-700F: Medium temp dab
This is a nice higher middle ground for those seeking both stronger High and effect, with slighly less terpene action. At this temperature, a mix of vaporization and combustion occurs.
710°F – Huge vapor little flavor and carcinogens are at higher concentrations
At this temperature, the nail may still be red hot and combustion is certain to occur. This will produce a harsh, intense hit with thick smoke. Most of the flavor will be lost at this temperature, resulting in a dab that tastes slightly burnt.
900+°F: High Temp – 🙁 Burning the dab – Cancer causing agents are made and combustive at this high level
We don’t recommend taking dabs at this temperature – it is not pleasant nor is it healthy