12″ XLR Heating Pad for Vaccum Chambers
This is Heating Pad is mean for use with scientific vacuum chambers
used specifically for degassing.
UP the Extraction Game
The XLR Heating Pad for Vaccum Chambers for enails uses XLR connections so this replacement will fit any enail temperature controller with an XLR connector by choosing the model below. This is meant for use with scientific vacuum chambers. This Coil Replacement was made for use with our enails for our customers to replace the cable if they damage it. All cables can possible be damage by the user and no one wants to be without their enails working. There’s no need to buy another enail. Just purchase this E Nail Coil Replacement. You never know when a family pet will decide to eat your cable for fun. That is where this Coil Replacement for our enails with XLR connection for our enails. Plug it in the XLR connection on your enail temperature controller and have fun. So never fear if you or your pet damages the cable or if you break it yourself, we got you covered! if you see “EEEEE” on your 710 Life enails’ heater box then you have damaged your cable and need a replacement cable at once! Also if you have super erratic temperatures you can try Resetting your enail by holding down the > (Right Arrow) for 10 seconds which will reset the device, if the problem persist with erattic temperatures you need a new coil.
Extend your coils life!
A few things will dramatically reduce the life of heater
- Never use the coil at temperatures near 220ºF for an extended period of time. This will result in a burn out the heating coil.
- Do not use any other brand coil you can permanently damage your 710 Life main unit
- Never Apply water to heater for cooling or cleaning.
- Never alter, bend, twist, or otherwise stress the cable, connectors, coil rings or coil rod.