You’ve done your enail research and found the best, got all those customizable features selected to craft the perfect dab rig, and finally made the leap: you’re finally the owner of a brand spanking new 710 Life Micro eNail kit.

Here’s what’s included:

• 710 Life Micro eNail Controller. Lightweight and tiny enough to fit in the palm of your hand, this will be your temperature control box that heats your dab rig with the utmost precision.

• Heating Element. This will be the heating coil that’ll get your device nice and toasty – the range goes from room temperature of 65F° all the way up to 1000 F°– we recommend keeping it between 400-600F°.

• AC Power Cord. For all your charging needs.

• Nail Accessory. Whether you prefer the durability of titanium or the speed of quick heating quartz – all of our micro nails come with adapters for both male and female rigs.

• Carb Cap & Dabber. Yours for the scooping and the heat-trapping.

Now that you’ve got all your ducks – and accessories – in a row, you’re ready to set up your 710 Life Micro eNail kit and get to dabbing. So grab your favorite sauce, get cozy, and read on for 710 Life Micro eNail set-up 101, tips and tricks, temperature how-to’s, and more.

Setting up Your 710 Life Micro eNail: Let’s Get in Formation

1. Choose your adapter, attach your coil, and install onto your water pipe.

Connect your nail accessory to your heating element, paying attention to whether you’re using a male or female adapter piece. Ready to slide the bowl piece of the nail through the heating element. \Make sure that your heating element and your nail are both attached securely to each other as well as to the water pipe!

2. Connect your heater coil with the controller unit.

Attach your heating element to the 710 Life Micro eNail controller by plugging in the connector on the element into the port on the back panel of the controller.

Double-check that your 710 Life Micro eNail is still powered off at this point to make sure power is only applied when expected. Your nail and coil are about to get super hot – so make sure there’s nothing touching either before you start.

3. Power on the control unit.

Last but not least, after connecting your power cord to your controller – plug it into an outlet. Your electric dab rig is ready to rumble.

Using Your 710 Life Micro eNail For The First Time: It’s Getting Hot in Here

Now that you’re all set up, let’s talk temperature. Before you get started, knowing how to adjust to your set temperature will make your dabbing experience a bit more seamless.

On your 710 Life Micro eNail, you’ll see one up and one down button: the current temperature on the display will start flashing to show you the desired set temperature instead. You get about 5 seconds to adjust the temperature to exactly where you’d like it.

Once you see your set temperature flash – hands off! Don’t press any more buttons for 5 more seconds as the display stops flashing and goes back to the current temperature.

Pro-tip: for all the terp lovers out there, try experimenting with cold-start dabs. For these, instead of pre-heating your 710 Life Micro eNail, load your concentrate onto your nail first – and then start heating. Since the temperatures will be lower, you’ll actually preserve certain cannabinoids that would otherwise burn off on a higher setting. With a cold-start (or reverse) dab, you’ll get a boost in flavor and actually reduce residual buildup and potential for breakage.

Powering Your 710 Life Micro eNail On/Off: Let’s Get It On (and Off)

Keep in mind that powering on your 710 Life Micro eNail takes about 3 minutes – depending, of course, on the set temperature. When you move the switch to the ON position, the LED display will show a negative number that will then start to rise, and you’ll notice the flashing HEAT LED. Take this time to adjust your temperature, and once that’s reached, the Initial Power On mode is over and your 710 Life Micro eNail is ready to go.

When you power off your 710 Life Micro eNail, all you have to do is switch the position to OFF – just remember that the entire Power Down takes up to 10 minutes. Once the coil reaches room temperature, the 710 Life Micro eNail is completely off (be patient, and don’t test this with your fingertips!).

Some Final Words of Wisdom

Good news: you’re ready to get dabbing and your 710 Life Micro eNail is calling your name.

Before we let you go – whether it’s your first (or hundredth) day using your 710 Life Micro eNail – we’ll leave you with a few parting tips and tricks that’ll make for a smoother (no pun intended) dabbing experience.

• Save power by leaving your 710 Life Micro eNail on from the start of your day’s dab to the end instead of going through multiple on and off cycles. With the same wattage as a household light bulb, you don’t have to worry about leaving it on all-day
• Don’t forget to take off the carb cap after your dab: leaving it on will cause concentrate to burn and make your nail more difficult to clean. It’ll also make it really hot if you don’t take it off right away!
• Speaking of cleaning, invest in having Q-tips on hand to swab your nail after each dab.

And, finally, for a more in-depth and visualized tutorial to have on hand, download our User Manual here.

 

Happy dabbing!

 

What all the hype is surrounding the eNail Kit?

An eNail Kit is a dabbers best friend…. As technology improving on every aspect of our lives, there’s bound to be something that’s safer and easier to heat your quartz banger or titanium nail for dabbing other than holding a dangerous super high-temperature thingy like the butane torch. That’s we invented the 710 Life E-nails  and now everyone wants an enail kit or enails . it’s very simple to use a lot safer device that allows for precision control of your temperatures. It’s not exactly rocket science, the working mechanism is relatively simple, in this 420Life Wiki we’ll show you what makes an enail dab kit and why should it become the next big thing in the dabbing game.

Think of your coffee machine or water heater, they all have at least one PID controller in them, so you can have the perfect shower or a nice cup of coffee,  PID controllers are in everything.

710 Life PID Controller

 

 

An eNail dab kit consists of a PID Controller in an enail dab kit is responsible for adjusting the temperature of the coil using the dials on the control panel, by connecting to the thermocouple temperature sensor that was built-in the heating coil, the display panel can show you the temperature rising or dropping in real-time. It’s the “brain” of the whole dab kit.

The standard connection joint of the controller is the 5 pins Mini XLR female joint, which means there is a lot of space for modifying and customizing your equipment when you get the hang of it.

There is an on/off switch on the back of the unit (this only applies to 710 Life controllers, other manufacturers might place the button/switch on the front or the side of the unit), when it’s switched on it’ll start working and vice versa.

 

 

 

 

Heating Coil

 

 

Heating Coil: As the opposite to the PID controller’s 5 pins XLR female joint, the heating coil has a male one that’s used to connect to PID controller.

The size of the coil comes typically in two sizes: 16mm and 20mm. Two different sizes for fitting the 16mm or 20mm quartz banger or the titanium nail. Since quartz banger’s catching on and more dabbers prefer the pure taste that the quartz bangers bring, and quartz bangers require more space of the chamber(due to the thickness of the quartz material) to vaporize the cannabis concentrates like wax, shatter, rosin and more, the typical coil size for quartz bangers for enails is 20mm.

 

 

 

 

 

 

As we mentioned above, the heating coil contains a thermocouple temperature sensor in it, so it can send real-time data of the temperature of the coil back to the PID unit and tell you the temperature of the coil at the moment.

A heating coil works like any home-use appliances that use thermal short circuit mechanism to heat stuff like your hair dryer or the toaster, a strong but controlled current of electricity caused a thermal short circuit in the coils so it will start to heat itself immediately and pass the heat to the quartz banger or the titanium nail. The heating process is gradual and controllable makes the enail safer to use than a butane torch.

Power Cable

 

 

Power Cable: The power cable connects to both the PID controller and the power socket or wall plug, it’ll come in different plug format depending on which country you’ll be using the enail kits.

 

 

 

Quartz Banger

 

 

 

Quartz Banger: Just like any typical quartz banger or titanium nails out there that is used for dabbing, the working mechanism of the dab nails that are used on an enail kit is the same: there will a heat source to pass the heat to the bangers, when they are heated to around 500°F and up, you can place the concentrates in and it will vaporize. Quartz dab nails that are designed to fit the enail heating coil will have a little handle like bar on the right side of the tube to place the heating coil

 

 

 

 

 

Titanium Nail

Titanium Nail a titanium dab nail screw off the top plate, place the heating coil in the middle of the nail and then screw the top plate back again. Both dab nails are easy to assemble. As we mentioned, the bangers need to fit the heating coil, so you need to measure the size of your old ones before purchasing a new one. The barrel-shaped heating coil will wrap around the quartz banger/titanium nail to pass the heat to them. It is not necessarily to be a very snug fit, as we all know that materials will expand when exposing to heat so a very tight fit may break your quartz dab nail when heating and it can be dangerous.

 

 

 

 

Once you’ve attached the heating coil to your quartz banger/titanium nail, then you can insert them in your favorite dab rig to enjoy you tasty dabs!

 

 

 

 

 

 

 

 

 

 

An enail dab kit is usually made or assembled by these parts:

• The PID Controller 
• Heating Coil 
• Power Cable 
• Quartz Banger/Titanium Nail that Fits The Size Of The Heating Coil
• Dab Rig(If you purchased a bundle)

PID controller: PID stands for proportional–integral– derivative, a very commonly used mechanism, many of our home-use electric appliances use this mechanism to control temperature, flow, speed, pressure etc.

Enails

Best e-Nail of 2020. what is an Enail?

Simply put, an ENail is a device typically used for vaporizing prescription cannabis extracts. This is most commonly referred to as dabbing or dabs.
Enails – how they can change your life
Toss the torch and pick up the 710 LIFE™ ENAIL. The fastest heating highest quality eNail on the market today. Our product is 3x times faster than any other brand guarenteed. our palm sized eNail is small yet built for hard core dab competitions, constant everyday use and daily dabbing. Our enail is designed, engineered, and shipped from Los Angeles, California. Low constant consistent temperatures allow you to get the most flavor and medicinal effects our of your essential oils and concentrates. No more waiting for the torched nail to cool and feeling for the right temperature. Be certain everytime your nail is always ready to go at the temperature you desire. put down the torch and get our enail FOR A

The best dabbing experience is dabbing with an eNail !

Enails and the effectiveness of an e-nail.

if your looking for an e-nail you have come to the right place. Our e-nail are the safest on the market. Unlike others, ours contain safety features. Our e-nails contain a fuse for your safety and come with rubber pads to prevent grounding, slipping, or scratching surface of your furniture. We make the best quality products you can find. Get yours today and see what you’ve been missing.

Let’s talk about safety as safety should always be kept in mind! Our e-nails are the only ones that have a fuse to protect you. Our temperature controller has some safety features built in. Something Some kits fail at providing. When the whip is not attached or a wire has become damaged the controller will report this back to the user as “EEEE” and preventing shock and fires due to exposed or damaged cable.

Next is features. Memory, with on-board memory remembers your favorite preset temp even when unplugged. My personal best reason to own an e-nail is flavor. When it comes to flavor lower temps are best for flavor and being able to set your temperature with digital accuracy is crucial to maximizing flavor and vapor . Overheating any essential oil destroys the valuable medicinal properties and terpenes. once you find your perfect temperature, your done it’s on-board memory! Every time you turn on our e-nails it will remember what you like. just turn on the power switch and it will heat up to your pre-programmed temperature. No one likes to set the temperature every time they plug in their e-nail in. Our e-nails will remember your favorite temperature, just set it and forget it!

We have been selling and manufacturing for years and have gotten to be the leading brand on the market today! Get yours today and start seeing what everyone else is talking about. Enails dramatically enhance the flavor and essence of your dabbing experience. Enails are truly the way of the future and are simple to use. Just plug them in set the temp and your good to go dab away! True dabbers know the benefits of their e-nails, get yours and start enjoying yours today!
A growing tool in the 710 world of concentrate dabbing. An E-nail are portable, less dangerous and overtime are far less expensive than purchasing gas tanks constantly.
Enail aromatherapy is healthy !
Portability is very important, some e-nails are bulky and cumbersome, our e-nails are small, compact and durable. The titanium nail that our kit includes is universal and fits all water pipe and oil rigs out there! Whether you have 10mn 14mm 19mm male or female it doesn’t matter our one titanium nail does it all.
Price is another important factor, our e-nail is the best priced e-nail around. We manufacturer and sell so many units that we can easily offer you the best e-nails for the best prices!
Enails are catching on quickly for many reasons as you can see. No e-nail is complete without a carb cap so make sure to grab one of them. If you prefer to smoke from quartz we offer Quartz bangers for our e-nail. E-nails are especially useful for dabbing parties where there is a need for a constant hot nail ready to go.

THE 710 LIFE PORTABLE ENAIL KIT WILL CHANGE THE WAY YOU DAB ENHANCING THE FLAVOR OF YOUR TERPENES!

ENAILS ARE ON THE RISE AND IT’S EASY TO SEE WHY! THE BEST CHEAP AND AFFORDABLE E-NAILS ONLINE!

Dabbing with enails help keep an even temperature throughout your session, preserving your delicious terpenes from your oils and medicinal value. After using an e-nail for dabbing you will not go back to using a torch.

Exactly how much do you spend on butane every month?

Enails are available all over the web, are you interested in buying a reliable and affordable electronic e-nail unit without holding out on quality?
Do you wish to spend less while greatly improving your experience with dabbing oil?
Are you interested in having control over the temperature at all times?
Do you want to keep the temperature stored after every session?

THE MOST COMPLETE E-NAIL KIT OUT RIGHT NOW. INCLUDES ALL THE NECESSITIES NEEDED TO GET STARTED DABBING!

710 Life Enails are unique units that heat your wax or oil to its ideal medical temperature without losing any medicinal value or flavor by having to use a torch. Easy to use with any dab rig. Using it with a recycler rig on a lower temperature setting can deliver some of the smoothest hits!

Just turn it on, set your temperature with the up and down buttons and start dabbing! This e-nail will store your temperature on its on-board memory chip! The 710 LIFE electronic nail is the hands down one of the most affordable enails on the market in 2016 and much needed when vaporizing essential oils. Enjoy having control over the exact temperature that you’re dabbing at.

The 710 LIFE e-nail is guaranteed to pay for itself, no more running to the store for more butane, with the 710 LIFE e-nail unit those times are done and over with. With the 710 Life E Nail dabbing is very simple to use for Wax & Essential Oils.. Much more compact than carrying a torch and butane around with you.

Stop overheating your oils! This e-nail has a digital LCD temperature controller to display the temperate. Hot spots are no longer a problem with this e-nail! Heat up your nail with the included coil designed specifically for the 710/420 scene. Start enjoying the taste and terpenes from your concentrate.

Why buy 710 Life e-Nail by 420 life?

First off we are the only AC Powered Enail to ever win a High Times Cannabis Cup Best Product Award! Our Enail is the fastest heating enial on the market, PERIOD! All of our units are made with you in mind. The wiring is soldered and shrink wrapped in the unit’s connections. Our top-rated customer service can quickly assess your problem, so rest assured you will be taken care of if anything goes wrong. Simply contact us through our official customer support on our product website.\and we’ll be more than happy to help. Step into the future of future and experience what everyone else is talking about.

The easy to use temperature control helps keep your e-nail at a constant temperature throughout your session. You’ll finally be able to truly taste the terps in your oil. Setting the right temperature is a must for a smooth hit. Lower temperatures offer smoother hits, while higher temperatures are better for more clouds.

This unit is meant for aromatherapy with organic essential oils and extracts. It’s as easy as plugging it in and setting your desired temperature. After waiting for the unit to heat up, you’re ready to go! Many other e-nails companies don’t offer customer support, but with the 710 Life E-nail you can rest assured that all your issues will be resolved. Join the revolution and purchase your own e-nail kit today!

 

CLICK HERE FOR THE BEST MICRO ENAIL ON THE MARKET

 

CLICK HERE TO CHECK OUT ENAIL ACCESSORIES 

 

 

 

 

 

 

 

 

 

 

 

Enail Instruction Manual – Setting up your first enail

User’s Manual For 710 Life Enail Dab Kits

Enail dab kits or enail dab rig bundles are some of the most popular items listed on 420life.com, and we’ve heard from our customers via phone call and emails saying that the user manual for using these enail kits are not very specific and a bit hard to understand.  Setting up an enail is super easy, let us step you through it.  So on today’s 710 Life Blog / Wiki, we’ll be talking about the specific steps for assembling and setting your enail dab kits for the perfect dabbing experience!  Please note that this manual is for the desktop enail dab kits made and sold by 710 Life, enails from other brands might not be the same in terms of assembling and operating.  you can also click here for a full detailed instruction manual that you can download, print, or save for later, click here or image below

1. CONNECTING YOUR POWER CABLE TO ENAIL PID CONTROLLER.

The socket for connecting the power cable is located on the back of the enail PID controller, the power cable features a 3-pin connector(often seen for using on monitor, printers, and PCs) and since this type of power cable is very common and it’s very easy to buy and replace.  Please note that on this step don’t connect the power cable to the power outlet yet.

2. CONNECTING THE ENAIL COIL TO THE PID CONTROLLER.

Simply insert the male joint of the enail coil into the enail PID controller, the side of the small opening window should be facing upward when you insert. The female socket on the controller features a secure mechanism, it will lock the two joints tightly together to prevent the joints from getting lose and falling off.  The heating coils listed on 420life.com features two shapes: flat and barrel shape, and many different sizes, from 10mm all the way to 25mm. But the way these enail coils are used is the same, it connects the enail PID controller via the 5-Pin XLR connection.  The enail heating coil features a male 5-Pin XLR connection, the temperature sensor is located inside the coil so you can see the temperature index on the screen real-time.   After using, you’ll need to press the silver “PUSH” button on top of the socket in order to detach the enail coil.

3. PUTTING THE HEATING COIL ON YOUR QUARTZ BANGER/TITANIUM DAB NAIL.

For Quartz Bangers

The heating coil for quartz bangers is usually in a barrel shape.  First, aline the barrel shape enail coil and the quartz banger, gently put the quartz banger into the coil, make sure that the tail of the coil should be at the bottom so it can rest on the small handle of the banger.

For Titanium Dab Nails

First, screw off the top plate of the titanium nail, then place the coil in the middle of the nail then screw the top plate on again, the tail of the enail coil can be on top or on the bottom, as long as you secure the top plate of the titanium nail both ways are fine.  After completing this process, put the quartz banger/titanium dab nail onto any dab rig or bong you’ve chosen to dab with. The controller will start heating immediately when it’s on.

4. TURN ON THE ENAIL PID CONTROLLER.

Plug the power cable into your wall socket, then press the ON/OFF switch.  The ON/OFF switch is located on the back of the enail PID controller just right next to the power cable socket. Press the silver button then the PID controller will start working.  Please note that when the controller is on, it’ll resume the temperature setting of your last use, if it’s the first time you turn it on, it’s default setting is 700 degrees Fahrenheit.

5. SETTING THE TEMPERATURE ON THE PID CONTROLLER.

This is the tricky part.  First, press the SET button located on the left of the control panel, the index on the screen should start flashing, that means the controller is now in setting mode.  The temperature setting will start from the hundreds, press the up and down buttons to select the number you desired and then press the “right” symbol on the right to select the next digit setting.  Once you are done with your setting, press SET again, your controller starts working to heat the enail coil to the temperature that you’ve set.  For Low-Temperature Dabs, the temperature should be set from 300~500 degrees Fahrenheit.  For High-Temperature Dabs, the temperature should be set from 600 and up.  Subjectively speaking, we think that the enail quartz banger is the best for low-temperature dabbing and the titanium dab nails are the best for high-temperature dabbing.

6. AFTER USING.
Please note that enail coils can still be very hot after you turn the PID controller off, you’ll need to wait at least 15 minutes before touching both the heating coil and the quartz banger/titanium dab nail.  Always clean your quartz banger/titanium dab nail after use. If you don’t know how to clean your dab nails, here is an article we wrote about clean your quartz bangers, check it out here.  Don’t clean the heating coil with water! As we mentioned, there is a temperature sensor located in the enail heating coil, you must prevent water from getting into it. Use an alcohol wipe will be the best when it comes to cleaning the heating coils.

Is an Enail Worth the Investment?

Enails are technological innovation, but so too are they an investment. Here’s all you need to know before splurging.

The dabbing game is getting more and more high tech each day. Color-changing bangers, intricate percolators, and even enails are all a part of the professional dabber’s tool set and experience. Not everything that’s advertised is as helpful as it looks, but with all the buzz around an enail, we can’t help but delve into whether or not this invention is worth the investment.

THE INS AND OUTS ON ENAILS

An enail is an ingenious addition to any dabber’s collection. It’s a foolproof method for reaching the perfect temperature, without ever having to use a torch. Enails entered the dabbing scene just a few years back. Short for electronic nail, it was a response to the demand for a gadget that makes vaporizing concentrates that much simpler. What with a torch, a timer and a load of patience, dabbing can be a tedious process.  As far as engineering goes, it’s not an overly complicated tool. Most setups include a controller box that sends a signal through a coil to heat up. This coil is attached to a dab nail, thus heating up the rig appropriately. Since an enail allows you full control over the temperature, you can simply enter your desired level of heat and wait for it to reach the set number. Overall, an enail lets you bring your banger up to speed automatically and maintain optimal temperature as long as you need.

HOW AN ENAIL HELPS YOU CONSERVE CASH

While you’re spending money, to begin with, enails have a way of keeping the cash flow to a minimum after the initial investment. Here are a couple of ways that this nifty contraption helps you save money in the long run.

You don’t have to buy a torch. An enail eliminates the need for a separate torch, so you don’t have to spend money on replacement after replacement. Even if it’s just a few bucks here and there, that really adds up.  Enails let you conserve your concentrates. Since they maintain optimal temperature, you don’t have to go through your wax quite as fast. Rather, you can use it bit by bit, knowing good and well you’re heating it to just the right temperature. Too hot and all your dabs would be gone in a second. Too cool and you wouldn’t reap the full benefits of each hit as it comes.  Knowing this, you may find an enail to be an investment worth checking out. If nothing else, it brings a sense of intricacy to the dabbing grounds. For many, that’s the only convincing they need.

STAY SAFE WITH THE BEST EQUIPMENT by 710 Life

If you’ve ever dabbed before, you know that safety is a key ingredient. Even though you’re eliminating the torch from the equation, there’s still a chance that things could go awry should you forget to pay attention.  Enails create extremely high temperatures up to and beyond 1,000 degrees Fahrenheit. Due to this, it’s crucial that the operator remain vigilant and aware because they’re ultimately the ones who are responsible for the safety and well being of those around them. If you have animals, children or even someone who has never heard of an enail in the home, do yourself a favor and take extra precautions when the time comes. And with those elements that go along with the outdoors, you’ll want to keep your enail within the walls of your home.

AN ENAIL TO GET YOU STARTED

You don’t have to be a dabbing veteran to get yourself an enail. In fact, everyone has to start somewhere, so it makes total sense that you’d want a basic bit of technology to heat you up. At 710 Life, we have a beginner-friendly enail that gets the job done without overwhelming you.

Portable Enail Bubbler

 

For an all-in-one setup to get you started, this enail bubbler is the perfect fit. Able to be carried anywhere your heart desires (within reason), it features a rechargeable battery that prevents any possibility of burning yourself. It’s a great way to familiarize yourself with the world of enails without being overwhelmed with too many technicalities. Including a magnetic carb cap, titanium, and ceramic nail, silicone wax jar and more, you’ll have everything you need to get toking.

 

Cannabis Vaping: All You need to know!

 

With increased legalization of cannabis, it’s time to know the basics of consuming weed. Like how to consume weed, how long does a high last, what’s it like to get high. People are now open to try cannabis for recreational as well as for medical reasons. Many are looking for what’s the best ingestion method. For beginners, the best way to start is by using vaporizers. They are easily available and are very economical.

So, what is vaping? Vaping is the intake of vapor through inhaling and exhaling using an e-cigarette or similar device. With the growing popularity of e-cigarettes, vaping has gained a lot of attention. Common vaping devices are vape pens (look like large fountain pens), and advanced personal vaporizers/MODS.

Making a Vaporizer work

Vaporizer consists of a cartridge for the e-liquid or e-juice, attached to a mouthpiece running in a battery. Most common vaporizers are vape pens. Turning on the device heats the battery which converts the e-liquid into an aerosol which you then inhale through the mouthpiece into the lungs. Not all vape pens work the same. Some vape pens use convective heating where they heat the air below the plant material. This hot air then goes around and through the weed and releases THC, CBD and other cannabinoids in the air.

Other kinds of vape pens use conductive heating which works by heating up the weed directly through a metal plate or chamber. It then releases cannabinoids in the vapor when the weed touches the hot surface. The e-liquid consists of vegetable glycerin-based liquid propylene glycol with nicotine and other chemicals but not tobacco. Both conductive and convective vaping devices have their pros and cons. Conductive heating is cheaper while convective heating fails to maintain a stable air temperature around the herb. Therefore, you can use a device that has a combination of both.

Ways to Vape Weed

The stationary vaporizers are big machines that work on electricity. They are usually put on a flat surface like a table. The vaping device varies from model to model and may use either a plastic balloon or a small hose. In the case of vaporizers with a balloon model, you can inhale the vapor when the balloon gets automatically inflated. While if the vaporizer is a hose, then, you can inhale the vapor through the hose directly. Vaping weed is very easy. Put the weed on the surface, or in the chamber, and plug in the vaporizer. Then set the desired temperature and turn on the electricity. Once the chamber with weed is hot enough you can inhale the vapor.  If you are a dabber check out our eNails which are used for vaping wax.

Using a Vape Pen

Vape pens are similar to an electronic cigarette. They work on battery. Before using, charge the battery and fill the desired material in it. Vaporizers come in different varieties and are small in size. So, it’s important that you read the instruction manual that comes with it before using it to understand the various features like turning it on and controlling it. Vape pens need not be only meant for cannabis, but some of them can be used for cannabis concentrates. However, do check the instructions or call the manufacturer if you are unsure about its usage.

The Feeling of a High

Most of the cannabis strains after vaping will make you feel light-headed or pressure in the eyes. Although the intensity and type of head rush depend on which type of cannabis strain you are using. On the other hand what you experience while vaping strongly depends on various factors, in fact, little to do with the drug sometimes. Factors like your frame of mind while using it, how sensitive you are to the surrounding, your feelings about the people you are vaping with and the place where you are having it.

 

Commonly cannabis users talk about the feeling of getting dizzy and zoning out. Cherish moments like these as it can be extremely calming. You should note that the terpene and cannabinoid composition of a particular cannabis strain determines the amount of high that it can produce when smoked. As an example, the cannabis indica varieties contain a terpene called myrcene which is responsible for the “couch lock” type of high that is great for relaxing and going to sleep. Whereas, the cannabis sativa strains are more known for creating energizing and uplifting moods that go well with physical activities and while working on creative projects. The way to identify a sativa strain from an indica strain is that sativa leaves are narrow and short. The indica strains, on the other hand, have short and broad leaves.

 

Duration of a High

Now, this completely depends on how much, how long, and what type of weed you vaporized. For beginners, like first-time vapers, it can last for one to four hours. But in the case of edible cannabis, the high lasts for six to eight hours. And that’s the reason you shouldn’t try edible cannabis until you have tried cannabis vaporizer once.

 

Hope this article was helpful in answering most of your questions on vaping. Vaping is better than smoking as it’s easier to control the high in a vaporizer. Keep in mind that you should not vape and drive since cannabis stays in your system long even after the high feeling leaves you. With the growing popularity, awareness of cannabis, and its long list of benefits, many people are opting to cultivate cannabis using pocket-friendly budget buds which are readily available online.

 

Author Bio
Jessica has been closely studying the cannabis industry trends from quite some time. Intrigued by the booming growth of this sector, she takes an interest in penning down her views providing quality insight on current marijuana trends, particularly medical cannabis.

Best Bangers in 2020

The Best Quartz Baangers For Enail In 2020, here at 420 Life / 710 Life we have the most versatile sizes and the best quality quartz bangers you can find 99.999% pure.  Watch our best quartz banger video and watch our temperature resistant quartz banger be tossed into cold water while red hot!

 

Enail dab kits are becoming more and more popular by the day. As we all know that using an enail dab kit for dabbingis far more safer and cleaner than using a butane torch, it’s becoming clear that some day enails will take over the market.  But we’ve noticed that in all these years of development, we can see there are a lot of different types of enails emerging in the market, the basic mechanism for heating the titanium dab nail or quartz banger stays the same: by using a PID controller connecting to a heating coil.  Although the coil size of the heating coil for enail kits stays the same(16mm, 20mm, 25mm, flat coil for 10mm, etc), we don’t see a lot of options when it comes to picking a perfect titanium dab nail or quartz banger to pair with the heating coil.  Here at 710 Life, our passion towards developing better quartz bangers and titanium dab nails never change, we work closely with our engineer to experiment different types of designs to develop enail quartz bangersthat fits our standard of functionality and aesthetics.  In order to help you understand the features and have a better understanding of what kind of quartz banger/titanium dab nail is the best for your own enail dab kit, we’ve listed some of our best sellers in 2019, see what’s the best for you!   the taste like quartz for your enail? Well look no further, this Titanium Quartz Hybrid Nail/Banger For 20mm Heating Coil Enail can fulfill your every need, it’s a perfect fit for any enail with 20mm heating coil!

• • This is a unique piece that we’ve been developing in the past few months, we’ve created nail with 4mm thick bottom and a built-in core reactor to hold the heats better than any quartz banger for 20mm enail coil on the market! A must-have item for enail enthusiasts!
    • Fits 20mm Barrel Coil.
    • Built-in core reactor to hold heat.
    • 14mm/18mm Male/Female Joints Available
    2. UNIVERSAL TITANIUM QUARTZ HYBRID DAB NAIL

If you are looking for something that could retain the heat like titanium and savor

• Fits 10/14/18mm Male/Female Dab Rigs/Bongs.
• 3rd Party Certified Grade 2 Titanium.
• 100% Pure Quartz Dish.
• Dish Washer Friendly.
• Convert Any Bongs/Dab Rigs/Water Pipes Into a Dab Ready Piece.

• THERMOCHROMIC QUARTZ BANGER FOR ENAILS

Another one of 710 Life’s latest innovations.  When it comes to functionalities this unique thermochromic bucket quartz banger sure takes the cake. Since 710 Life’s launch back in May 2018, our thermochromic bucket and the core reactor banger for enails had been two of the most popular items for dabbers. So we come up with the idea: How about making a thermochromic bucket that would fit desktop enails? 

Then we got to work and in Jan 2019, the thermochromic bucket quartz banger for desktop enails is here! This banger can be heated with blow torches and 25mm heating coils(please note that most of the heating coils for enails on the market are 16mm/20mm/22/24/25/26/28/30 )! We’ve developed a 28mm OD heating coil to fit this unique quartz banger.  We  also carry a flat topped 30mm banger

Instead of watching the indexes showing on the PID controller, now you have an alternative visual indication of whether your quartz banger is ready for dabs! It works like any thermochromic bucket quartz bangers, once heated to around 500° F the thermochromic material in the vacuumed sealed layer of the banger will turn bright red. 

• Fits 25mm Barrel Coil.
• Thermochromic Enail Quartz Banger
• Blow Torch Friendly 
• 14mm Male Joint Available

5. HYBRID TITANIUM/QUARTZ DOMELESS UNIVERSAL NAIL

 

This Hybrid Titanium and Quartz Domeless Nail is compatible with 10mm, 14mm, 18mm, male or female joints and also works with all flat coil e-nails. This domeless nail combines the durability of titanium along with the smooth taste you’d expect from a quartz nail.

The grade 2 titanium base will last a lifetime while the quartz dish can be easily replaced. The 3 piece design allows you to replace the quartz dish very easily and take it apart for easy cleaning.

• Fits 10mm,14mm, and 18mm Male or Female
• 3 Piece Domeless Design for Easy Cleaning
• Grade 2 Titanium Base, Quartz Dish
• E-Nail Compatible
• Replaceable Quartz Dish
• Joint: 10mm, 14mm, 18mm Male or Female
• Height: 2.5″

FINALLY, SOME TIPS FOR CHOOSING THE PERFECT QUARTZ BANGER FOR YOUR E-NAIL KITS…

Know Your Heating Coil’s Size, 80 percent of the heating coils for enail kits on the market right now are 16mm/20mm, so you’ll need to check with your operating manual, if you don’t have one, contact your seller for confirmation before ordering will be the best.

 

Never Use A Cracked Quartz Banger. I know, you spent a fortune to get your dream setup, you had fun for a few months then you noticed there are little cracks on the inside of your quartz banger, STOP USING IT, I’m serious, when being applied to a massive amount of heat, a cracked quartz banger could explode in front of your face.

Low Temperature Dabs Or High Temperature Dabs? If you like to savor every sip of your cannabis concentrates, or maybe you have a small dab rig  with limited water inside to cool down the temperature of your dabs, better go with a quartz banger and set your enail at 500°F. If you’re a hard core dabber or you have a large dab rig(or a that’s been converted into a dab rig), going with a titanium dab nail and set the enail at 700°F will suit you the best.

 

Cleaning:

• Only clean units while powered down, unplugged, and properly cooled down to safe levels.
• while still warm, swipe with dry Q-Tip then swipe with alcohol dipped Q-Tip.
• to clean inside clean nail with a soak in warm isopropyl alcohol or denatured alcohol then rinse and wipe dry
• Regular cleaning of nail will increase performance and airflow.
• Never clean the nail by raising temperature this will kill your coil

Great ways to clean… We have 2 great articles on cleaning and maintaining your quartz nails

The Importance of a Clean Quartz Nail to Dab on Correctly!

For Deep Cleaning your quartz to pristine conditions click here

For daily maintenance and cleaning please click here

Why Is It safer To Use An Enail Dab Kit Instead Of A Butane Torch?

As dabbing becoming more and more popular in the cannabis community, it’s considered to be one of the most healthy ways of using cannabis, the whole process is clean and combustion-free, you can use any solvent or solventless cannabis concentrate of your choice and using various types of equipment to heat and vaporize it.

Today we will be discussing why is it safer to use an enail dab kit instead of a butane torch. Most of the dabbers use a butane torch to heat the quartz bangers or titatium nails to their desired temperature and dab since the beginning of the whole dabbing scene. However, as we all know, butane torch can get extremely hot and very dangerous to operate even when you are at your normal state, not to mention trying to operate something that generates that much heat while high. Things can get quite messy.

 

A new way of vaporizing your cannabis concentrates was brought to the cannabis community in around 2014, the technology is being called, as we know today, Electronic Nail, e nail or enail. The device normally includes 2 essential parts: The PID controller which controls the temperature of the heating coil, and the heating coil itself, typically uses an XJR connection to connect with the PID controller. There are even portable enails  that you can take on trips if you want, the portable enails works quite similar to the desktop enails but Desktop still are king for flavor and always on capabilities! it’s like a compact version of everyday enails, we will write about the benefits of using a portable enail someday.

 

Now let’s break down a few points why using an enail dab kit is far safer, cleaner and more efficient than using a butane torch to dab.

Butane Torches Are Hazardous To Use

As we mentioned earlier, the butane torch can generate a massive amount of heat while in use, how much heat exactly? According to Wikipedia, the typical home use air butane torch when in use, the tip of the flame’s temperature can reach approximately 2,610 °F (1,430 °C).  It’s hot enough to melt a wide range of common metal such as gold, copper and steal, not to mention any organic compounds. You could easily heat the nails over 1000°F if you are not careful, and the result of that is you might burn your concentrates almost immediately once you put them in, the vaporization process will be so rapid, even when you didn’t burn the material it will definitely lose all its organic flavor and taste horrible, the solvent-based concentrates might even generate harmful elements under that extreme heat and damage your health.

When you are using your torch to heat the nail, you need to move the flame all around the quartz banger or titanium nail in order to spread the heat more evenly, that could be dangerous for the clumsy dabbers out there, especially for the first time dabbers, you’ll inevitably point the butane torch at yourself at some point, you could easily ignite your shirt if you are too close.

A torch could mean bad news for your dab rigs as well, especially when you are using a titanium nail, the heat will conduct from the nail to the dab rig or your bong’s joint at a very rapid rate, the nail can be heated to more than 1000 degrees Fahrenheit easily if you are inexperienced, the joint won’t be able to stand temperature that high for that long, it’ll break in front of your eyes! You can always use an adaptor as a solution, but unfortunately, the adaptor seems to be fragile as well so you might need to replace it once in a while just to be safe.

Why Are The Enail Dab Kits Safer?

Using an enail dab kit could solve almost all problems you’ll have using a butane torch.

First of all, you are in total control of the temperature when you use an e nail. Just simply put in the temperature you desired into the PID controller. Since the heating coil is equipped with a thermocouple temperature sensor it will heat the banger exactly to the temperature that you’ve index and stay at that temp for multiple dabs if you want. We would recommend 300~500°F for low-temperature dabs and 500~700°F for high time dabs. Even though 710 Life enail kits are capable of reaching over 700°F we don’t recommend doing dabs at that high of a temperature because you might damage your lungs.

Secondly, you don’t need to manually heat the bangers all over like you need to when using a butane torch, the heating coil does all that for you. The heating coil wraps the quartz banger or the titanium nail (depends on the kit you bought) around tightly and heats evenly so there will not be some weird high temp spots that might ruin the taste of your cannabis concentrates. You just need to index the temperature you want and wait till the enail kit does it all for you, you’ll find this hands free feature especially important when you are stoned 😉

Lastly, you don’t need to worry about your precious glassware collection breaking because of the heat. Your dab rigs or bongs could cost a fortune to buy and it’s a unique representative of our taste and nowadays with all the themed glass bongs or dab rigs around, they could even be a self-statement. Using an enail dab kit, especially a quartz enail dab kit can protect your glassware, prevent them from breaking from the beginning. You probably know that glass will break at around 400°F, since the heating coil is keeping a safe distance from your dab rig/bong’s joint, and there is no flame to heat up the joint, you rest assured that your glassware will be around for a lifetime of use.

What’s An Enail Dab Kit? – Dabbing 101

Enail dab kits or enail kits are one of the most used tools on the market right now for dabbing.
Watch this quartz enail kit in action:
As technology improving on every aspect of our lives, there’s bound to be something that’s safer and easier to heat your quartz banger or titanium nail for dabbing other than holding a dangerous super high-temperature thingy like the butane torch. That’s when the E-nails (or enails) comes along, it’s very simple to use and a lot safer like I mentioned above. It’s not exactly rocket science, the working mechanism is relatively simple, in this post we’ll show you what makes an enail dab kit and why should it become the next big thing in the dabbing game.

WHAT’S IN AN E-NAIL KIT?

An enail dab kit is usually made or assembled by these parts:
• The PID Controller
• Heating Coil
• Power Cable
• Quartz Banger/Titanium Nail that Fits The Size Of The Heating Coil
• Dab Rig(If you purchased a bundle)
PID controller: PID stands for proportional–integral– derivative, a very commonly used mechanism, many of our home-use electric appliances use this mechanism to control temperature, flow, speed, pressure etc.

Think of your coffee machine or water heater, they all have at least one PID controller in them, so you can have the perfect shower or a nice cup of espresso.
The PID Controller in an enail dab kit is responsible for adjusting the temperature of the coil using the dials on the control panel, by connecting to the thermocouple temperature sensor that was built-in the heating coil, the display panel can show you the temperature rising or dropping in real-time. It’s the “brain” of the whole dab kit.

The standard connection joint of the controller is the 5 pins XLR female joint, which means there is a lot of space for modifying and customizing your equipment when you get the hang of it.

There is an on/off switch on the back of the unit(this only applies to 710 Life PID controllers, other manufacturers might place the button/switch on the front or the side of the unit), when it’s switched on it’ll start working and vice versa.
Heating Coil: As the opposite to the PID controller’s 5 pins XLR female joint, the heating coil has a male one that’s used to connect to PID controller.

The size of the coil comes typically in several sizes: 16mm, 20mm,24mm,25mm,26mm,28mm,30mm,55mm. Different size coils needed for for fitting the each (20mm,24mm,25mm,26mm,28mm,30mm,55mm) quartz banger or the 20mm titanium nail. Since quartz banger’s catching on and more dabbers prefer the pure taste that the quartz bangers bring, and quartz bangers require more space of the chamber(due to the thickness of the quartz material) to vaporize the cannabis concentrates like wax, shatter, rosin and more, the typical coil size for quartz bangers for enails is 20mm.

As we mentioned above, the heating coil contains a thermocouple temperature sensor in it, so it can send real-time data of the temperature of the coil back to the PID unit and tell you the temperature of the coil at the moment.

A heating coil works like any home-use appliances that use thermal short circuit mechanism to heat stuff like your hair dryer or the toaster, a strong but controlled current of electricity caused a thermal short circuit in the coils so it will start to heat itself immediately and pass the heat to the quartz banger or the titanium nail. The heating process is gradual and controllable makes the enail safer to use than a butane torch.
Power Cable: The power cable connects to both the PID controller and the power socket or wall plug, it’ll come in different plug format depending on which country you’ll be using the enail kits.

Quartz Banger/Titanium Nail: Just like any typical quartz banger or titanium nails out there that is used for dabbing, the working mechanism of the dab nails that are used on an enail kit is the same: there will a heat source to pass the heat to the bangers, when they are heated to around 500°F and up, you can place the concentrates in and it will vaporize.

Quartz dab nails that are designed to fit the enail heating coil will have a little handle like bar on the right side of the tube to place the heating coil meanwhile a titanium dab nail screw off the top plate, place the heating coil in the middle of the nail and then screw the top plate back again. Both dab nails are easy to assemble.

As we mentioned, the bangers need to fit the heating coil, so you need to measure the size of your old ones before purchasing a new one. The barrel-shaped heating coil will wrap around the quartz banger/titanium nail to pass the heat to them. It is not necessarily to be a very snug fit, as we all know that materials will expand when exposing to heat so a very tight fit may break your quartz dab nail when heating and it can be dangerous.

Once you’ve attached the heating coil to your quartz banger/titanium nail, then you can insert them in your favorite dab rig to enjoy you tasty dabs!
Dab Rigs: Just like any other dab rigs, if you purchased an enail kit with dab rig bundle the kit will come with a dab rig of your choice.

Tips For New Users
DON’T touch the heating coil when it’s on! The heating coil will be very hot when the kit is on and operating, if you touch it, you are going to have a very bad day.
DON’T touch the heating coil or the dab nail when you just turn the controller off! After your dab session you might want to do a little clean up, but buried in mind that even when you turn off the power, the heating coil and the dab nail will still be very hot, you need to let them cool off for a while, wait at least 20 minutes, and make sure to disconnect the power cable off the socket before touching them.
DON’T use a cracked quart banger! If you spot tiny cracks on a quartz banger it means it’s totaled, don’t push your luck trying to use it a few more times! When a cracked banger is being used it can be hazardous, it can explode when being applied to a massive amount of heat. This rule applies to all quartz bangers not just the ones for enail kits.

What is a Portable Enail?

Some of you are here to learn what a portable enail is…. An Enail or E nails, the concept had been around since 2013, enails in full stands for electric dab nails, the device that dabber uses to heat their quartz banger without the help of a butane torch, making them the safest device when it comes to dabbing.

Desktop enails  needs to be plugged into a power source to provide electricity, through the PID controller to set the power output (setting the temperature) to the heating coil, as the heating coil begins heating, the heat will pass to the quartz banger or the titanium dab nail making them hot enough to vaporize cannabis concentrates.  The 710 Life AC pwered eNail has its advantages, stable temps, consistency and hands down best flavor of any enail plugin or portable

The practice became so popular that in 2015 the needs for an enail in the dabber community reached its peak, everyone wants to get their hands on one.  The 710 Life eNail is by far the choice of dabbers everywhere

 

 

 

But it doesn’t mean there is no downside of using a desktop enail, it’s like a desktop PC that must be connected to a power source for it to work. So AC powered enails are limited to home use.  Dabber would always want something that’s lighter and carry along with them on the go.

 

 

 

 

Just like any electronic devices, like your phone even your toaster, people will always find a way to improve their experience of something, the enail dab kits aren’t an exception.

The idea of a device that can generate enough heat(around 500°F) to vaporize cannabis concentrates aren’t that hard to find, vape pens are using the same mechanism to vaporize vape juice, so the idea of a portable enail comes along.

 

WHAT MAKES A PORTABLE ENAIL PORTABLE ?

The idea behind the device

Unlike the vape pen which can only vape juice, which is a mix of fluid fragrance and vegetable oil, a portable enail, or e-rig must be able to vaporize solid cannabis concentrates like wax, shatter, budder, sauce and diamonds!  So it will need to have an opening and a reasonable size dab nail to place the cannabis concentrates in.

The Body

The body is the “brain” part of the whole set, it’s essentially a powerful vaporizer in nature, unlike any ordinary vaporizer that only requires 400°F to vaporize vape juice, the body will need to heat the dab nails as high as 700°F for high-temperature dabs. This will require a lot of energy,  a  oZone 18650 battery will be standard to the portable enails.

A heating rod is connected to the two electro sockets, by pressing the button on the body, the PCB logic board is responsible for telling the heating rod how hot it should heat to, some of the smarter portable enails even have some preset modes to use different temps and types of dab nails! The heating rod is always designed to be easily removed so it can be changed, you’ll need to change the heating rod from time to time if you feel that the time needed for heating the dab nails takes longer.  The head of the body provides an 18mm male connection to fit in any glass attachment that’s 18mm female.

 

The Dab Nails 

The dab nails that are being used on the portable enails works the same way as any quartz banger or titanium dab nail, only the heating mechanism is different, the portable enails have a heating rod that heats up relatively quick and stable.The dab nails are designed to be screwed on and off from the body with ease.  Dab nails for portable enails are usually made from 3 types of material: Ceramic, Quartz, and Titanium. Some brands include all three of these dab nails in one set!

 

 

 

 

 

Quartz and ceramic dab nails are the best when it comes to flavors, but it has some downsides as well, comparing to a titanium dab nail the quartz and ceramic dab nails takes a bit longer to heat up but they could provide you with the purest taste of your concentrates, perfect for low-temperature dabs that only requires temperature around 500°F.

 

 

 

 

Titanium dab nails, however, speed and temperature is the key, if you want to get the temperature up to 700°F as fast as possible, you’ll find that the titanium dab nail is the best for you.

 

 

 

 

 

 

The Glass Attachment(Dab Rig)

The portable enail looks and works like a vape pen, unlike the vape pen, it usually comes with a glass attachmentthat works just like any dab rig, it provides filtration and at the same time cools down the vapor.  You can find a lot of glass attachments on Puffing Bird that suits you the best.

Why Dabbing Has Becoming More And More Popular?

Ever since the legalization towards both medical and entertainment use of cannabis/marijuana, as the process moves along, cannabis flowers or buds are becoming more and more available.  As the prices for the dry buds dropped dramatically, stoners and cannabis growers were thinking: Is it possible to make cannabis concentrates more available?  That’s when the dabbing game starts, it’s not like people doesn’t know you can extract cannabis concentrates from cannabis via different types of extraction technology, just back then cannabis buds aren’t as available as they are today. The scale of the cannabis farms(both indoor and outdoor) are merely mind-blowing, they are producing thousands of pounds of dry cannabis buds every harvest.  It’s due to these fantastic change in the volume of cannabis output that makes the dabbing game possible. As you can see in the chart below, in 2016, the sales growth of cannabis concentrates in Colorado retail sales is around 125%! Comparing to 11% of the dry flower consumption growth, the cannabis concentrates sales had grown more than 10 times!

 

Many cannabis consumers think that customizing their cannabis buzz is limited to the strains they have on their shelves, but temperature is an equally important factor. That’s is why you need direct temperature control. Many of our units of complete digital temperature control.  Take our Knockout Vape, it is used strictly for cannabis vaporization, precise temperature control leads to fat clouds and the best flavors.

Think of temperature control as the key to unlocking whatever effects a strain can offer. A strain that’s high in CBD, a non-intoxicating, relaxing, anti-epileptic (anti seizure) abilities, must be heated to the compound’s boiling point of 356°F if you’re to reap its benefits. Likewise, the relaxing terpene linalool isn’t unleashed until you hit 388°F. Temperature can also determine a strain’s intensity: higher temperatures typically exaggerate effects while lower temperatures offer a more gentle, mellow experience. if you like to dab, the best way to dab would be the 710 Life enail or 710 Life Micro enail.

 

This type of customization isn’t possible through smoking. When you bring a lighter to your bowl, you’re combusting the plant material which creates smoke, carbon dioxide, and other harmful byproducts. The temperature is hot enough to activate the THC and other compounds, but this “sledgehammer approach” isn’t terribly efficient, as temperatures that high can also destroy volatile but pertinent cannabinoids and terpenes.

Low Temperatures for Clear-Headed, Functional Effects

310°F to 330°F
Recommended for: mild euphoria, focus, productivity, subtle relaxation

There’s a time and place to be stoned off your rocker, but sometimes all you need is the slightest kick from your cannabis. For days when you need uplifting relief to carry you through chores and tasks, low-temp vaping is the key to a functional, productive buzz.

I loaded my Headband concentrate and set my vaporizer to 320°F in order to release three key constituents: the uplifting, focus-feeding terpene pinene; the pepper-flavored anti-inflammatory terpene caryophyllene; and of course, the psychoactive commander in chief, THC. Despite high levels of THC, vaporizing at this temperature didn’t make me feel stoned in the slightest. Instead, I was left feeling acutely alert and in complete control of my faculties. The taste was a subtle mix of herbs and pine, but certainly lacked the loud flavors found at higher temperatures.

Turning the heat up to 330°F, the high became slightly more intense but tasks and concentration were still completely manageable. The 290-330°F range seems the perfect fit for those who wish to stay productive and functional, cannabis novices and newbies, and/or anyone sensitive to THC’s side effects (dizziness, paranoia, dry eyes/mouth, lethargy, etc.).

Moderate Temperatures for a Balanced Buzz

330°F to 370°F
Recommended for: moderate euphoria, enhanced sensory awareness, mood elevation, functional relaxation

As you increase the heat, more THC is volatilized and your high becomes more intense. This middle range — 330°F to 370°F – gives rise to more euphoric effects that help elevate the mood, stimulate giggles, and kick start the appetite. It’s more functional than when you push past the 370°F mark, but you will most definitely start to feel the stone that lower temperatures spared you.

Historically, 365°F has been the sweet spot for me (I’ll never forget because the first time I vaporized, my friend read the machine’s clock-like screen and thought it was 3:65PM). I’ve always loved the combination of tamed euphoria coupled with the subtle relaxation and focus found at this temperature. I turned my Herbalizer up to 365°F and dished out more of the Headband wax. The vapor felt fuller than it did at 330°F, and the flavor was perfectly fruity with the aftertaste of sweet vanilla licorice. Its effects were distinctly different from the low-temp experience: my thoughts went from a sloppy sprint to a relaxed walking pace, allowing me to unwind and focus.

Whether you’re kicking back with a book, exercising, socializing, cleaning, or playing video games, these moderate temperatures provide most of the cannabinoids and terpenes you want without fully volatilizing the THC – I know many people who would want as much THC as possible, but for others it’s about achieving a careful balance of clear-headedness and blissful elevation.

High Temperatures for Intense Euphoria and Relaxation

370°F to 430°F
Recommended for: intense euphoria, sleep, heavy relaxation, meditation

For ultimate THC decarboxylation mode, turn your vaporizer above 370°F. At these high temperatures, you get terpenes like linalool (calming, anxiety relief) and cannabinoids like THCV (energizing, appetite suppressant), but keep in mind that they’re approaching combustion territory. You may even notice the vapor become smokier and harsher on the lungs.

Durban Poison is a South African sativa known for its elevated levels of THCV, a highly psychoactive cannabinoid known to weaken appetite (yes, weaken). I coincidentally had this strain in my collection last week, so I decided to cook it at 430°F to see if I felt more “energized” than I would at a lower temperature.

The above temperature tiers don’t so much “create” effects – they modify them, so keep in mind that the limits of your customization are set by whatever strain you’re working with.

Mario eNail – Painted and Matching Silicone Dab Mat

NOT A CHEAP WRAP

Do you play Mario?  Are you all  about everything Mario? Did your grow up  with Mario or did you  just get  into Mario? Do you also Dab?  Turns out most adult players playing Mario are stoned  right now as you are  reading this article.

 

Th Character We All Love turned into a Mario  Enail

Mario is the main character and protagonist of the long-running and highly successful Mario franchise. He was created by Japanese video game designer Shigeru Miyamoto and also serves as the main mascot of Nintendo. Mario made his first appearance as the protagonist of the arcade game Donkey Kong, released in 1981. Since Super Mario Bros., his trademark abilities have been his jumping and stomping powers, with which he defeats most of his enemies, and his ability to gain powers with a plethora of items, such as the Super Mushroom, the Fire Flower, and the Super Star. Games have usually portrayed Mario as a silent character without a distinct personality (Fortune Street is a notable exception). According to Nintendo’s philosophy, this allows Mario to fit in many different genres and roles. In most games, he is the hero that goes on an adventure to save Princess Peach from his archenemy, Bowser, but he has been shown doing many other activities besides adventuring, such as racing and sporting with his younger twin brother and others.

So,  we decided to create the  first ever Mario eNail and Matching Silicone Dab Mat Set.  Now your  whole  life can be Mario 🙂

 

Fortnite eNail – Painted and Matching Silicone Dab Mat

NOT A CHEAP WRAP

Do you play Fortnite?  Are you all  about everything Fortnight? Do you also Dab?  Turns out most players playing Fortnite  are stoned  right now  as you are  reading this  article.

Fortnite has been described as a cross between Minecraft and a shooter game. Survival is the name of the game. Players fight each other, making it through a night of zombies, or surviving to the end of a massive battle, and they use the landscape around them to find materials to build shelters.   The game launched in July as a console and PC game, but the Fortnite franchise has steadily picked up steam as it added new playing modes. Its most buzzed-about mode is the “battle royale,” a free, massive 100-person fight to the death that only allows for one survivor. That mode was released as a stand-alone game in September.  it’s a high-quality game, which can be rare among free titles. It’s fun and simple. Fortnite Battle Royale’s last man standing format is easy to understand at a glance. Forming a strategy is smart, but not a prerequisite for victory. Its cartoonish graphics make its violence easier to stomach, analysts said. All of that makes it the perfect title at a time when games are increasingly trying to tap into the market for new players through streaming.

So,  we decided to create the  first ever Fortnite eNail and Matching Silicone Dab Mat Set.  Now your  whole  life can be Fortnite 🙂